Tiptel.com 811
Τηλεφωνικό κέντρο 2 ISDN γραμμών 8 εσωτερικά
Τηλεφωνικό κέντρο tiptel.com 811
Τηλεφωνικό κέντρο υβριδικό με συνδεσιμότητα σε απλές γραμμές PSTN, ψηφιακές ISDN και VOIP τηλεφωνία για μικρές επιχειρήσεις με 8 απλές θύρες εσωτερικών και 1 θύρα για ψηφιακή τηλεφωνική σύσκευή γραφείου.
Δέχετε 1 ή 2 ISDN γραμμές από τον πάροχο.
- 1+1 ISDN-BRI γραμμές ( η μία θύρα με επιλογή για εξωτερική ISDN ή εσωτερική για κονσόλα)
- 8 αναλογικά εσωτερικά με αναγνώριση κλήσης
- Day/ Night (με τη κάρτα Voice Mail/DISA)
- Tapi Driver
- Προγραμματισμός μέσω web interface
- Σύνδεση με θυροτηλέφωνο (προαιρετικά)
Επεκτασεις για :
- Voip γραμμές
- 2 Αναλογικές γραμμές PSTN
- Voice Mail έως 48 mailboxes και
DISA/Auto Attendant
Χώρα προέλευση: Γερμανία
Business ISDN phone system up to 6 users with VoIP optional
Professional ISDN-PBX-system with 2 S0 (switchable as external S0 (BRI) or internal S0) and 4 analogue extensions with caller ID (FXS). Meets all requirements of professional use in offices as ACD group function, Least Cost Routing and a lot of other functions. The PBX are integrated in already existing network and can completely be configured via any common web browser. No installation of drivers or software is needed. That's why tiptel systems are the optimum solution for Apple, Windows, or Linux users. TAPI driver for 3rdparty CTI (Windows) are available, so that dialling from databases as Outlook are supported. Plug in extension modules available for answering-machines and call-management (VCM-module), 2 external analogue lines (2FXO-module) and VoIP external and internal (VoIP-CP module 4/8 or 8/16).
Highlights
- 2 S0 (switchable as external S0 -BRI- or internal S0), 4 analogue extensions with caller ID (FXS)
- ACD group function, Least Cost Routing
- Web configuration via network
- TAPI driver for 3rdparty CTI
- Plug in extension module
Technical data
ISDN-connection |
|
ISDN-port(s): |
2 ports, switchable as external S0 (BRI) or internal S0 |
Mode switched to external S0: |
Protocol DSS1, Point to Point or Point to Multipoint |
Mode switched to internal ISDN-port: |
Protocol DSS1, Point to Multipoint |
Feeding: |
40 V +5% / -15% max. 2W feeding for both connections together |
Circuit type: |
SELV |
Analogue extension-ports |
|
Internal analogue extension-ports |
8 |
Supply voltage: |
40 VDC |
Power supply: |
21 mA +/- 10% |
Ringing voltage: |
48 V +/- 10% , 50Hz |
Frequency of the audible tones: |
440 Hz |
Call-charge pulse: |
16 kHz or 12 kHz |
Max. length of the |
450 m |
Dialling method (analogue): |
MFV |
Circuit type: |
TNV 2 |
Analogues lines (FXO) |
|
External analogues lines (FXO) |
2 lines, optional by 2FX0-module |
Tone detection: |
290 - 510 Hz |
Sensitivity: |
12 mV on a/b |
Dial tone recognition: |
≥ 100 ms |
Tone detection: |
950 ms - 1750 ms |
Speech recognition: |
Signals outside the tone detection |
Busy signal recognition: |
100 ms: 100 ms to 600 ms: 600 ms |
Number of tones until detection: |
2 |
Ring detection: |
14 Hz - 120 Hz |
Ringtone break: |
600 ms to 9,9 s |
Dialling: |
tone (DTMF) dialling |
Charge recognition |
12 or 16 kHz |
Impedance loop condition: |
ZR international |
Power supply |
|
Mains voltage: |
230 V +6% / -10%, 50 Hz |
Power drain: |
max 29,9 VA |
Stand by power: |
‹ 6 W |
Extensibility |
|
tiptel.com VCM module |
optional |
tiptel.com VoIP-CP module 4/8 or 8/16 |
optional |
tiptel.com 2FXO module (2 external analogue lines -FXO-) |
optional |
Further interfaces |
|
LAN: |
10/100 Mbit/s |
Circuit type: |
SELV |
Dimensions |
|
(W x H x D): |
approx. 260 x 140 x 50 mm |
Weight : |
approx. 700 g |
Enclosure material: |
ABS, fire protection class HB |
Assembling |
1,62 mm |
Weight of the wall wart: |