- 5 End-of-Line Resistor zones; All zones are entirely programmable as entry / exit, Instant, Follower, 24 Hour; 24 Hour Fire, 24 Hour Tamper, 24 Hour Panic, 24 Hour Medical Emergency, arming / disarming (key-switch);

 - Keypad programming or EZcom C51 upload/download software;

 - 1 installer code;

 - 15 programmable User Codes, the last of which if programmed, being capable of sending an additional ambush code to the central station;

 - Options of Quick Arming: Quick Away Arming, Quick Stay Arming and Quick Instant Stay Arming;

 - forced arming feature;

 - Programmable protection against undesired resets to default values

 - 8 zone attributes individually programmable, as well as zone response time individually selectable;

 - Zone bypassing;

 - Chime feature activated / deactivated by the users;

 - Programmable siren alarm type: Steady, Pulse or Silent; different bell cut-off timings for burglary and fire alarms;

 - Individually programmable entry and exit delay;

 - Key switch arming / disarming, as an option;

 - 2 programmable outputs with 16 options: Latch alarm, Follow system status (armed / disarmed), Entry delay, Exit delay, System Trouble, Auxiliary Siren, Silent alarm, Fire, Tamper, Panic, Medical Emergency, Mono-stable, Pulse on arming, Pulse on disarming and Bi-stable;

 - 255-event LOG up-downloadable and viewable through the EZcom C51 upload/download software and, optionally, reported to the central station;

 - Keypad displayed alarm memory;

 - Digital communicator with DTMF Ademco Contact ID format;

 - Programmable reporting codes for Zone Alarming, Restoring and Bypassing;

 - Programmable zone restore (either when zone close back or when siren stopping);

 - Programmable reporting codes for Arming / Disarming / Ambush, according to the user code;

 - Programmable reporting codes for system trouble situations: Low Voltage on Battery, Battery Voltage Restore, AC power loss, AC power Restore, Bell Trouble (upon disconnection or burnt fuse), Bell trouble Restore, Burnt fuse on AUX, Fuse on AUX Replaced, Keypad Lockout;

 - 2 programmable phone numbers for transmission to the “central stations

 - monitoring of system troubles: voltage battery, AC power, Bell and AUX outputs;

 - Option of telephone line monitoring (TLM);

 - Up to 4 keypads, which can be simultaneously 4-wire coupled to one central unit;

 - LED-uri de stare a sistemului: READY, SYSTEM, BYPASS, ARMED;

 - Keypad tamper (using micro-switch);

 - Individual status LEDs for zones 1-5, indicating the alarm memory;

 - System status LEDs: READY, SYSTEM, BYPASS and ARMED;

 - the control panel reports upon remote interrogation call or sends automatically on the phone line synthesis sounds for alarms and AC power loss events;

 - Several upload/download operations (PC programming using EZcom C51 Software);

      - upload of system parameters into PC (onto EZcom C51 Software);

      - programming parameter download from EZcom C51 Software onto the control panel;

      - upload of events from the control panel into EZcom C51 Software (in a file);

      - system date and time setting by EZcom C51 Software;

      - Arming/Disarming by EZcom C51 Software;

      - Zone bypassing by EZcom C51 Software;

      - Mono-stable / bi-stable PGM outputs activation / deactivation by EZcom C51 Software.

- Charging current for backup battery up to 100mA.

 POWER:

 - Minimum 12V / 4Ah backup battery;

 - 18Vac / 20VA transformer;

 - Current consumption in stand-by mode:

      - 50mA - control panel;

      - 12mA - keypad;

 - Current available on +AUX: up to 0.3A fuse protected.

 INPUTS:

 - 5 fully programmable 2K2 EOL zones.

 MAIN BOARD OUTPUTS:

 - 2 “open-collector outputs, with negative trigger (NPN), up to 50mA;

 - 1 supervised siren output with positive trigger (current capability on +BELL: up to 1A fuse protected).